Official distributor of Koch Chemie · Colourlock · ChemicalWorkz in Moldova
+373 792 615 03 Mon–Fri 09:00–18:00 · Sat 10:00–14:00
RU RO EN
Koch Chemie Product Code: KCX-380

Silicone, Wax, Oil and Grease Remover Koch-Chemie Silicon- & Wachsentferner (Sil), 5 L

800.00 lei In stock
  • Pickup: str. Potîrnichii 48/1, Chișinău. Delivery across Chișinău and Moldova — [delivery terms].
  • Pay by Visa / Mastercard via Paynet [or cash on delivery].
  • Straight from the distributor — no intermediaries, no counterfeits.

Koch-Chemie Silicon- und Wachsentferner (Sil) is a water-dilutable, alcohol-based degreaser designed to remove silicone oil, wax and polishing compound residue from solvent-resistant surfaces.


The dilution can be adjusted to suit the application. The product may be used undiluted on resistant surfaces or diluted with water for more sensitive materials. It leaves the treated surface clean, degreased and antistatic, helping reduce dust attraction before painting or applying a protective coating.


The formula is free from halogenated hydrocarbons and promotes reliable adhesion of subsequently applied coatings and materials.


Advantages:

— Can be used undiluted or diluted with water, depending on the surface

— Economical in use: may be diluted with up to four parts water for sensitive applications

— Suitable for application by cloth or spray

— Leaves the treated surface antistatic

— Original Koch-Chemie product


Areas of application:

— Degreasing paintwork, plastic, glass and metal before painting or repair

— Removing polishing compound, silicone and wax residue after polishing

— Preparing paintwork before applying sealant, wax or a ceramic coating

— Preparing vehicle surfaces before painting or localized paint repair

— Localized degreasing before applying film or bonding trim and decorative components


Directions for use:

Apply the product undiluted to solvent-resistant surfaces. For more sensitive surfaces, dilute one part product with up to four parts water.


Apply the product using a cloth or spray bottle, then wipe the treated area with a clean, dry cloth.


For single-stage paint finishes without a clear coat and other sensitive paint finishes, always dilute the product at a ratio of one part product to four parts water. The undiluted product may reduce the gloss of these surfaces.


Before use, test for colour fastness and material compatibility on an inconspicuous area.


Suitable for professional and private use.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good