Heavy Cut Foam Pad D76

Koch-Chemie Heavy Cut Foam Pad D76 is a firm polishing pad with a diameter of 76 mm, designed for heavy paint correction and the removal of deep scratches, severe weathering, oxidation and sanding marks. It is intended for use with Koch-Chemie Heavy Cut H9.01 and H9.02 polishing compounds.

Its low 25 mm profile reduces torsional stress on the polishing machine while improving stability and control during polishing. The firm open-cell foam provides strong cutting performance for severe paint defects and is easy to clean after use.

Why red?

Red identifies the Heavy Cut range in Koch-Chemie’s polishing pad colour-coding system. It indicates the highest-cut correction stage and makes the intended use and matching polishing compound easy to identify at a glance.

Advantages:

— Versatile 76 mm diameter, offering greater manoeuvrability than large pads while remaining more efficient on larger areas than compact pads

— Firm foam with high cutting performance, designed for heavy paint correction rather than light polishing

— Durable foam retains its firmness during extended polishing sessions

— Milled edge makes it easier to polish curves and complex body contours

— Suitable for polishing machines with an appropriately sized backing plate

— When used with Heavy Cut H9.02, Koch-Chemie recommends a rotary polishing machine

— Original Koch-Chemie product

Areas of application:

— Deep scratches, severe weathering and oxidation on paintwork

— Sanding marks remaining after surface preparation or paint repair

— Use with Koch-Chemie Heavy Cut H9.01 or H9.02 polishing compounds

— Heavy correction of doors, fenders and other medium-sized body panels

Directions for use:

Attach the pad to a suitable backing plate on a compatible polishing machine. The backing plate should be smaller than the working diameter of the pad and should not extend beyond its edge.

Apply a small amount of Heavy Cut H9.01 or H9.02 to the pad and spread the product evenly over the working area at low speed.

Then polish using overlapping cross-hatch passes at medium speed and moderate pressure, while monitoring the panel temperature.

When using Heavy Cut H9.02, Koch-Chemie recommends a rotary polishing machine.

Clean the pad thoroughly after use and allow it to dry completely before reuse.

Suitable for professional use and experienced private users